HomeGuides
Log In

Failsafe settings

DJI drones

Failsafe settings such as "Return home altitude" and "Action on the loss of RC" can be configured in the route parameters menu.

719

Return home altitude will be used by the drone in case of a failsafe event.

If the current drone altitude is lower than the Return home altitude, the aircraft will adjust its nose direction to face the home point. It will go to a specified return home altitude before returning home.

If the current drone altitude is higher than the Return home altitude, the aircraft will adjust its nose direction to face the home point and fly home at its current altitude.

Action on loss of RC can be the following:

  1. Home - the drone returns to the home point;
  2. Continue - the drone continues the uploaded route;
  3. Do not modify - the drone will act in accordance with settings in the Native software.

Maneuver the aircraft, to avoid any obstacles, when returning home.

Note!!! A complete list of failsafe actions can be found and configured in the Native software of the drone.

Ardupilot

Failsafe settings such as "Return home altitude" can be configured in the route parameters menu.

720

Route-specific fail-safe settings:

Action on loss of RC can be the following:

  1. Home - the drone returns to the home point;
  2. Land - the drone lands even if in loiter mode;
  3. Continue - the drone continues the uploaded route;
  4. Do not modify - the drone will act in accordance with settings in the Native software.

Action on loss of GPS can be the following:

  1. Wait - the drone tries to maintain altitude;
  2. Land - the drone lands even if in loiter mode;
  3. Do not modify - the drone will act in accordance with settings in the Native software.

Action on battery discharge can be the following:

  1. Home - the drone returns to the home point;
  2. Continue - the drone continues the uploaded route;
  3. Do not modify - the drone will act in accordance with settings in the Native software.

Note! UgCS does not support failsafe settings for ArduPlane. Please use the Mission Planner or QGC to modify ArduPlane failsafe settings.

PX4

The parameter GPS Lost is not supported. The vehicle will behave as specified: by default, it will wait for the 30s. If the GPS signal does not restore vehicle will land.

Action on loss of RC can be the following:

  1. Wait - the drone changes altitude to failsafe altitude and returns home;
  2. Land - the drone lands even if in loiter mode;
  3. Continue - the drone continues the uploaded route;
  4. Return Home - the drone changes altitude to failsafe altitude and returns home.

Action on battery discharge can be the following:

  1. Land - the drone changes altitude to failsafe altitude and returns home;
  2. Continue - the drone continues the uploaded route;
  3. Return Home - the drone changes altitude to failsafe altitude and returns home.