Basic flight planning

To start planning the route click the Add new route button;

“New route creation” window will be displayed;

Leave “Create from scratch” marked and press “Next”;
Name the route, select the vehicle profile, and press “Next”;
Quick Search:
• Put the cursor to the search window

• Start to type drone name/model
• Choose the drone
• Click next

Leave the default parameters at the last step. More information about this window can be found
in the section “Route parameters”. To create a route with provided settings click “Ok”. A
new route card will be displayed with the specified name;

To create the route, select any of the Flight planning tools and add segments on a map by double-clicking or “SHIFT+left click”. Each Route's planning tool has
an associated inspector window enabling to adjust parameters like coordinates, altitude, and speed that will be considered during the calculation process. Also, the turn type and camera actions settings can be adjusted;

The path-finding algorithm of UgCS will automatically start the calculation of the flight path in a
few seconds when the user stops editing the route. The status of the calculation will be displayed as the Route’s calculation indicator on the Route’s card;

When the route is successfully calculated (green checkmark) it can be Uploaded to the vehicle.

To take off, Arm the vehicle and turn on Auto flight mode.

IMPORTANT! Operation procedures differ for each vehicle type. E.g. some of them may start from the ground, others require manual take-off to a safe altitude. Please read carefully the vehicle operation guide and UgCS “How to connect…” manuals. Pilot MUST know how to act in emergency situations at all times.

Note: safety is always a responsibility of the pilot!!!